When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Features:1. Practical Function: The blacksmith drift kit is specially designed for professional blacksmiths, knifemakers and beginners to drill holes to handle hand made tongs, hammers, axes, or tomahawks, etc. Finish forming holes quickly and perfectly through hot steel, helping you increase working efficiency a lot. 2. Built to Last: The drifts are lightly sanded with 60-grit to provide a smooth drifting operation and feature a reverse taper on the struck end so they fall through the stock successfully when you drive the drift. If the drifts ever bend, simply bring them up to low heating, straighten them with light hammer blowing, and allow them to air cool. VISA-POWER
Blacksmith Drift Kit Blacksmith Hammer Eye Drift Tool Set for Forging Tongs, Tomahawk, Axe (3 Pack)
Features:
1. Practical Function: The blacksmith drift kit is specially designed for professional blacksmiths, knifemakers and beginners to drill holes to handle hand made tongs, hammers, axes, or tomahawks, etc. Finish forming holes quickly and perfectly through hot steel, helping you increase working efficiency a lot.
2. Built to Last: The drifts are lightly sanded with 60-grit to provide a smooth drifting operation and feature a reverse taper on the struck end so they fall through the stock successfully when you drive the drift. If the drifts ever bend, simply bring them up to low heating, straighten them with light hammer blowing, and allow them to air cool.
3. Product Dimension: Package includes 3 blacksmith drifts in different size to satisfy your demand. The large Tomahawk drift tool with small end size 3/8 x 3/4 inch, large end size 7/8 x 1 1/4 inch. The large hammer drift tool with small end size 5/8 x 7/8 inch, large end size 3/4 x 1 1/8 inch. The mouse ax drift tool with small end size 5/16 x 7/16 inch, large end size 5/8 x 7/8 inch.
4. Easy Operation: Drill a series of small holes as close together in the center of the work piece to be drifted. Once the holes are drilled, heat the item and use a cold chisel or similar tool to split the piece. And then heat the piece again and drive the drift through the hole. Tap the sides of the workpiece while continuing to drive the drift into the workpiece until the drift hole gets to the desired measurement.
5. Satisfaction Guarantee: If you're not satisfied with the product, simply return it in 30 days or get a replacement during 12 month's warranty via our customer service. If your item is defective, incorrect, arrived damaged or any other problems, please contact us (include pictures if possible) and we will reply in 24 hours. Included:
The large Tomahawk drift tool measures 3/8 x 3/4 at the small end and tapers tear drop up to 7/8 x 1 1/4 at the large end.
The large hammer drift tool measures 5/8 x 7/8 at the small end and tapers up to 3/4 x 1 1/8 at the large end.
The mouse ax drift tool measures 5/16 x 7/16 at the small end and tapers up to 5/8 x 7/8 at the large end.
Item SpecificsBrand :VSSHOPType :Blacksmith Drift SetColor :BlackApplication :for Forging Tongs, Tomahawk, AxeMaterial :SteelNumber of pieces :3Warranty :1 YearSet or Single Item :SetSub-Type :Blacksmith Drift Kit Blacksmith Hammer Eye Drift Tool Set
Payment
1. Payment methods accepted: Payoneer. Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.
2. All major credit cards are accepted through our secure payment processor Payoneer.
3. We ship items to Your address.Please make sure your address is correct before you pay, cause it cannot be changed once the order shipped out.
Shipping
1. Item will be shipped out within 1-2 business day after clear payment received.
2. Please make sure shipping address on your account is correct & up-to-date.
3. All of our items are shipped from our US warehouse.
4. Please feel free to contact us by email if you cannot get your order in time.
Please read the shipment and payment detail carefully before you offer.
Returns Us orordernumberin allcommunications.
VISA-POWER
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home New Arrival ! DIY Blacksmith Accessories Outboard Boat Accessories ATV UTV Truck Accessories Caterpiller CAT Accessories DD/GM/LS Engine Parts Volvo & Mack Accessories Oil Filter Wrench Caps Car Accessories Jeep Wrangler Accessories Ford Mustang/F- Accessories Dodge Accessories Chevrolet Accessories Motocycle Accessories Tools Peterbilt Accessories Lawn Mower Parts OtherHigh RecommendedAutomotive Part Tool 61850 Truck Hub Seal Installer Set for Class 7 & 8 M Duty & Road Trucks Trailers USD 116.49 Knife Making Tongs Bladesmith Tong Set & Blacksmith Hammer 1500 kg Forge Tools USD 144.99 3163021 3163069 For Cummins ISX QSX Timing Injector Cam Gear Puller Tool Kit USD 94.99 60" LED Tailgate Strip Light Bar Reverse Brake Turn Signal Light for Car Truck USD 20.88 Hot Item ECX270861 Bottom Mount Pressure Gauge for Hayward Sand D.E. Pool Filter 60 PSI USD 12.81 Aluminum Extended Run Fuel Gas Cap w/ Brass Hose For Yamaha EF2000is EF1000is USD 15.99 Air Compressor Cylinder Sleeve & Ring Kit Replaces Craftsman K-0650 USD 18.90 Extended Run Fuel Gas Cap For Honda Generator EU2000i EU1000i Fits 1/4"NPT Line USD 12.70 60" LED Tailgate Strip Light Bar Reverse Brake Turn Signal Light for Car Truck USD 20.88 New List Item AM37875 Drive Shaft with Universal Joints Transmission Axle for John Deere 317 USD 114.99 12Pcs RK-17MH Metal Handle Repair Kit Fits Woodford Model 17 Outdoor Wall Faucet USD 21.50 74316 74317 Hot Tub Spa Pillows for Hot Spring Highlife Series Spas, Gray USD 26.99 AM132704 Snowblower Remote Spout Cap Push Pull Control Cable for John Deere Snow USD 74.50 99956034 Assy Power Supply Unit For Dolphin Active 10, Echo, Encore, Escape, E10 USD 289.00 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us Blacksmith Drift Kit Blacksmith Hammer Eye Drift Tool Set for Forging Tongs, Tomahawk, Axe (3 Pack)
Item SpecificsBrand :VSSHOPType :Blacksmith Drift SetColor :BlackApplication :for Forging Tongs, Tomahawk, AxeMaterial :SteelNumber of pieces :3Warranty :1 YearSet or Single Item :SetSub-Type :Blacksmith Drift Kit Blacksmith Hammer Eye Drift Tool Set
Features:
1. Practical Function: The blacksmith drift kit is specially designed for professional blacksmiths, knifemakers and beginners to drill holes to handle hand made tongs, hammers, axes, or tomahawks, etc. Finish forming holes quickly and perfectly through hot steel, helping you increase working efficiency a lot.
2. Built to Last: The drifts are lightly sanded with 60-grit to provide a smooth drifting operation and feature a reverse taper on the struck end so they fall through the stock successfully when you drive the drift. If the drifts ever bend, simply bring them up to low heating, straighten them with light hammer blowing, and allow them to air cool.
3. Product Dimension: Package includes 3 blacksmith drifts in different size to satisfy your demand. The large Tomahawk drift tool with small end size 3/8 x 3/4 inch, large end size 7/8 x 1 1/4 inch. The large hammer drift tool with small end size 5/8 x 7/8 inch, large end size 3/4 x 1 1/8 inch. The mouse ax drift tool with small end size 5/16 x 7/16 inch, large end size 5/8 x 7/8 inch.
4. Easy Operation: Drill a series of small holes as close together in the center of the work piece to be drifted. Once the holes are drilled, heat the item and use a cold chisel or similar tool to split the piece. And then heat the piece again and drive the drift through the hole. Tap the sides of the workpiece while continuing to drive the drift into the workpiece until the drift hole gets to the desired measurement.
5. Satisfaction Guarantee: If you're not satisfied with the product, simply return it in 30 days or get a replacement during 12 month's warranty via our customer service. If your item is defective, incorrect, arrived damaged or any other problems, please contact us (include pictures if possible) and we will reply in 24 hours. Included:
The large Tomahawk drift tool measures 3/8 x 3/4 at the small end and tapers tear drop up to 7/8 x 1 1/4 at the large end.
The large hammer drift tool measures 5/8 x 7/8 at the small end and tapers up to 3/4 x 1 1/8 at the large end.
The mouse ax drift tool measures 5/16 x 7/16 at the small end and tapers up to 5/8 x 7/8 at the large end.
PaymentShippingReturnsContact Us
1. Payment methods accepted: Payoneer. Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.
2. All major credit cards are accepted through our secure payment processor Payoneer.
3. We ship items to Your address.Please make sure your address is correct before you pay, cause it cannot be changed once the order shipped out.
1. Item will be shipped out within 1-2 business day after clear payment received.
2. Please make sure shipping address on your account is correct & up-to-date.
3. All of our items are shipped from our US warehouse.
4. Please feel free to contact us by email if you cannot get your order in time.
Please read the shipment and payment detail carefully before you offer.
orordernumberin allcommunications.
All right reserved.
