EC5 Jump Starter Cable with 12V Battery Clamps, 10AWG Booster Clips, 2PCS For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

EC5 Jump Starter Cable with 12V Battery Clamps, 10AWG Booster Clips, 2PCS:
$17.49

EC5 Jump Starter Cable with 12V Battery Clamps, 10AWG Booster Clips, 2PCS
FEATURES:

• The Battery jumper cable designed to serve as a jump starter replacement cable clamp set for most brands of 12V mini portable jump boxes. Compatible with most car mini jump portable starters, and mobile chargers to jump-start a dead or weak car battery.
• Wire: 10 AWG, OD 5.5mm, Jacket: Silicone Rubber. Connector: EC5 Female Plug. Compatible with most 12V battery booster jumper with EC5 male output.
• EC5 Jump Starter Cable with Battery Clamps - 12V Replacement Alligator Clips to EC5 Connector Car Jumper Cable for Emergency Portable Car Jump Start Battery Booster Cable 10AWG Wire
• The booster jumper cables is used to connect the car emergency starting power supply and car battery, to prevent the power supply positive and negative poles collide or cause a short-circuit situation, high safety factor, after the car is started, the anti-reverse charging current is less than 1A
• 1 - Connect the red battery clamp of the jumper cable to the vehicle\'s positive (+) battery and connect the black to the negative (-) pole; 2 - Plug the cord of jumper cable into the jumper starter\'s socket; 3 - Start the car and remove the clamps.

---

---